Here you can customise your electric bike services. Please follow the same process as above because these will be displayed separately to your standard services.

EBike Service Packages

Includes:

* Full visual inspection
* Error code scan
* Battery voltage verification
* Controller communication check
* Wiring & connector inspection
* Brake function inspection
* Drivetrain inspection
* Basic test ride (if applicable)
* Written estimate provided

Does NOT include:

* Electrical disassembly
* Oscilloscope testing
* Firmware flashing
* Internal motor inspection

Basic Diagnostic Inspection

A premium service is recommended every 18-24 Months.

Electric Premium Service

A standard service is recommended every 12 Month.

Electric Intermediate Service

A basic service is recommended every 6 Months.

Electric Basic Service

If you offer bike fittings you can customise the price and description here.

Fittings

Help to optimize comfort, performance and efficiency.

Standard Bike Fitting

Select what extras or individual services you offer. If you don’t have a set price, you can select "Price on request"

Other Services

Fit Handlebar Tape

Fit Tubeless Tyre

Gears Adjusted & Tested

Headset & Crank Bottom Bracket Adjusted

Headset Fit

Hubs Adjusted for Play

Hydraulic Brake Bleed

Internal Brake or Gear Cable Fit

Puncture Repair Excluding Inner Tub

Puncture Repair Including Inner Tube

Rear Mech Hanger Replacement

All Nuts & Bolts Checked for Tightness

Battery Capacity Test

Bicycle Build - Child

Bicycle Build – Adult

Bicycle Damage Report for Insurance Companies

Bottom Bracket Fit

Brakes Adjusted & Tested

Cassette Replacement & Fit

Chain Replacement & Fit

Complete Strip Down & Rebuild

Derailleur Hanger Straightened

Drivetrain Service - Items Cleaned, Inspected, Adjusted and Checked

External Brake or Gear Cable Fit

Fit Tubular Tyre

Frame Threads Reamed & Faced

Replace Disc Brake Pads

Replace Rim Brake Pad

Service - Suspension (Forks)

Service – Suspension (Rear)

Service Headset

Service Hub - Single

Software Update & Diagnostic Report

Spoke Tensions Balanced & Wheels Re-trued for Alignment

Tyres Inflated to Correct Pressures & Inspected for Wear

Wheel Build - Pair

Wheel Build - Single

Wheel True With Spoke

Wheels Trued for Correct Alignment

Drivetrain/Gears

Saddle

Accessories

Handlebar/Headset/Stem

Wheels/Tyres

Brakes (Brake & Pad Type)

Bottom Bracket/Cranks

Pedals

Frame/Fork

Update electronic drivetrain firmware

Charge/replace electronic drivetrain batteries

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Clean and insect saddle rails/clamps. Adjust position if needed

Check saddle for wear/damage

Ensure any accessories are safe/secure

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Inspect headset for wear/corrosion, adjust

Inspect handlebar for wear/damage, check torque

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

Inspect spoke tension and true lateral/radial as appropriate

Inspect tubeless system, top-up or replace consumables as appropriate

Inspect condition of hose/cable

Inspect caliper for correct function including clean/lube pistons

Inspect brake rotor for wear/damage/torque

Clean and inspect bottom bracket shell threads if appropriate

Inspect chain rings/crank arms/spindle for wear/damage

Inspect pedal body for wear/damage

Inspect and regrease pedal/crankarm threads

Inspect chain for wear/damage lubricate

Inspect rear derailleur cable/electronic wire for wear/damage

Set rear derailleur upper/lower limits and b-tension

Inspect front derailleur for wear/damage

Set front derailleur upper/lower limits

Inspect / adjust suspension linkages (if required)

Suspension forks, clean/inspect seals and upper tubes. Check for function

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar tape/grips for wear/damage

Inspect spokes and rim for wear/damage

Inspect tyres for condition and wear

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of brake pads

Inspect condition of hydraulic fluid if applicable

Adjust brake, ensure correct function including no rub and appropriate bite-point

Inspect bottom bracket torque, ensure free rotation of bearings

Install crankset, ensure smooth running/no play

Ensure smooth rotation of pedal bearings and check for play

Inspect cassette for wear/damage and torque

Ensure derailleur hanger is straight and secure

Inspect rear derailleur for wear/damage

Adjust rear derailleur indexing

Set front derailleur position/height

Adjust front derailleur indexing

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

Introducing Workshop

About us

Hours

Bikebook Reviews