Please edit your services to reflect what you offer and fully customise the description and prices accordingly. If you operate less than three levels of service, please look at our pre-selected items, and decide what level your services match. You can remove a level by simply unticking it.

Service Packages

The full works - everything you need to ensure your bike runs as good as new. The Ultimate Service covers everything in the Intermediate Service plus brake bleeding, and removal/servicing of your headset, bottom bracket and hubs as needed. Recommended annually or before a bike trip or major event/race.

Ultimate Bike Service

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Inspect headset for wear/corrosion, adjust

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar for wear/damage, check torque

Inspect handlebar tape/grips for wear/damage

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

Inspect spokes and rim for wear/damage

Inspect spoke tension and true lateral/radial as appropriate

Inspect tyres for condition and wear

Inspect tubeless system, top-up or replace consumables as appropriate

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of hose/cable

Inspect condition of brake pads

Inspect caliper for correct function including clean/lube pistons

Inspect brake rotor for wear/damage/torque

Adjust brake, ensure correct function including no rub and appropriate bite-point

Clean and inspect bottom bracket shell threads if appropriate

Inspect bottom bracket torque, ensure free rotation of bearings

Inspect chain rings/crank arms/spindle for wear/damage

Install crankset, ensure smooth running/no play

Inspect pedal body for wear/damage

Ensure smooth rotation of pedal bearings and check for play

Inspect and regrease pedal/crankarm threads

Inspect cassette for wear/damage and torque

Inspect chain for wear/damage lubricate

Ensure derailleur hanger is straight and secure

Inspect rear derailleur cable/electronic wire for wear/damage

Inspect rear derailleur for wear/damage

Set rear derailleur upper/lower limits and b-tension

Adjust rear derailleur indexing

Inspect front derailleur for wear/damage

Set front derailleur position/height

Set front derailleur upper/lower limits

Adjust front derailleur indexing

Update electronic drivetrain firmware

Charge/replace electronic drivetrain batteries

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Clean and insect saddle rails/clamps. Adjust position if needed

Check saddle for wear/damage

Ensure any accessories are safe/secure

Hydraulic brake fluid replacement if applicable

Full drivetrain dissassembly and degrease

Brake cable replacement as appropriate

Gear shift cables replaced as appropriate 

Replace hub bearings as appropriate

Replace handlebar tape if required

Get your bike running as smooth as silk, ensuring wheels, brakes, gears, headset, bottom bracket and hubs are cleaned and adjusted along with a full removal and degrease of your drivetrain. Recommended before a big ride, event or every 2-3,000kms depending on the conditions you ride in.

Intermediate Bike Service

Adjust headset preload

Drivetrain degreased

Keep your bike running smoothly with a fine tuning of your gears and brakes, and maintenance check of all major components. Recommended every 1,000km.

Introducing Workshop

About us

Hours

Bikebook Reviews