Please edit your services to reflect what you offer and fully customise the description and prices accordingly. If you operate less than three levels of service, please look at our pre-selected items, and decide what level your services match. You can remove a level by simply unticking it.

Service Packages

Like Christmas for your bike! Give it a whole new lease of life, and more importantly, take care of its less obvious bits to prevent it from deteriorating. A Full Service can make it feel like new again. It will also prevent you from needing to replace parts in the future as all the components will be inspected, adjusted and greased to reduce wear. This includes replacing any components that need changing too. The go-to choice for both the 'pride and joy' and 'been stored outside for a while' bikes!

A deeper clean of the bike, drivetrain and smaller components
Both wheels trued and spoke tensions checked
Wheel bearings cleaned and regreased or replaced (where possible)
Headset cleaned or replaced
Bottom bracket cleaned or replaced
All cables cleaned and lubricated or replaced
Hanger alignment checked and adjusted
Lubed and weatherproofed

Full Service

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

Inspect / adjust suspension linkages (if required)

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Suspension forks, clean/inspect seals and upper tubes. Check for function

Inspect headset for wear/corrosion, adjust

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar for wear/damage, check torque

Inspect handlebar tape/grips for wear/damage

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

Inspect spokes and rim for wear/damage

Inspect spoke tension and true lateral/radial as appropriate

Inspect tyres for condition and wear

Inspect tubeless system, top-up or replace consumables as appropriate

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of hose/cable

Inspect condition of brake pads

Inspect caliper for correct function including clean/lube pistons

Inspect condition of hydraulic fluid if applicable

Inspect brake rotor for wear/damage/torque

Adjust brake, ensure correct function including no rub and appropriate bite-point

Clean and inspect bottom bracket shell threads if appropriate

Inspect bottom bracket torque, ensure free rotation of bearings

Inspect chain rings/crank arms/spindle for wear/damage

Install crankset, ensure smooth running/no play

Inspect pedal body for wear/damage

Ensure smooth rotation of pedal bearings and check for play

Inspect and regrease pedal/crankarm threads

Inspect cassette for wear/damage and torque

Inspect chain for wear/damage lubricate

Ensure derailleur hanger is straight and secure

Inspect rear derailleur cable/electronic wire for wear/damage

Inspect rear derailleur for wear/damage

Set rear derailleur upper/lower limits and b-tension

Adjust rear derailleur indexing

Inspect front derailleur for wear/damage

Set front derailleur position/height

Set front derailleur upper/lower limits

Adjust front derailleur indexing

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Clean and insect saddle rails/clamps. Adjust position if needed

Check saddle for wear/damage

Ensure any accessories are safe/secure

By popular demand! This is the service that most bikes usually end up needing. A flexible option for bikes that need more than a Basic Service, but paying for a Full Service isn't realistic for the value of the bike or what you use it for. As well as everything in a Basic Service, it also includes time for some smaller repairs, a drivetrain clean, replacing the cogs and chain if required and most commonly to replace some of the wires or cables (which is one of the main causes of gear changing problems). We will prioritize what needs doing with the time so you get the most value for your money!

Basic service plus a thorough clean and prioritizing what needs doing the most to get the bike in good working order!

Happy Medium Service

A basic service is recommended for bikes that are in working order but would appreciate some attention and a check over. Also perfect for commuters' bikes that need more regular attention. This includes a thorough check-up of the bike, and the mechanic will highlight anything that might cause you trouble in the future. Servicing your bike gives you a smoother and more enjoyable ride!

Full safety 'M-Check'
Chain inspected for wear and lubed
Brakes checked and adjusted
Gear changes/indexing adjusted
Tyres pumped up to correct pressure
A light clean

Introducing Workshop

About us

Hours

What we offer

Bikebook Reviews