Full Service

Our most comprehensive option, the Tier 3 Service is perfect for bikes needing major servicing or full restoration. This includes a complete strip-down to bare frame, deep cleaning, re-greasing, and replacement of worn or damaged components to bring your bike back to peak performance.

Advanced service

Tier 2 Bike Service Repairs, Cleaning & Parts Replacement | Designed for bikes that need more than a tune-up, our Tier 2 Service includes thorough cleaning, replacement of worn parts, and detailed inspection of key components. Ideal for regular riders looking to restore performance and reliability.

Basic Service

Tier 1 Bike Service, Tune-Up & Safety ChecK Perfect for bikes needing a basic tune-up and full safety check. Our Tier 1 Service includes inspection of brakes, gears, tyres, and key components to keep your bike safe and smooth on the road.

Drivetrain degrease

Keep your drivetrain running cleaner and lasting longer. We’ll remove built-up grime from your chain, cassette, derailleur and crankset using professional degreasing tools and finish with proper lubrication. Ideal after a wet, muddy ride.

Additional Labour Charge

Spoke Replacement (with Tubeless Tyres)

Snapped a spoke on a tubeless setup? We’ll carefully unseat your tyre, remove the tubeless tape, replace the spoke, and tension the wheel to factory spec, with minimal sealant mess.We will carefully inspect all other spokes and nipples whilst we're there to ensure you don't have to go through multiple tubeless setups. New rim tape and new sealant may be required.

Pivot bearing service (Full suspension bike)

For full-suspension bikes, worn pivot bearings can cause play and creaks. We’ll press out the old bearings, fit high-quality replacements and torque everything to spec, restoring suspension feel and frame stability.

Puncture Repair/ Tyre Replacement Excluding Inner Tube

Tyre gone soft? We’ll quickly locate and resolve the puncture, check the condition of your tyre, and get you back on two wheels. Does not include new inner tube. Fast turnaround while you wait.

Wheel Build - Single

Looking for a custom-built wheel? We’ll hand-lace your spokes, tension and true the build to your riding style – whether it’s for road, gravel, or mountain biking. Built right here in Portishead by experienced mechanics.

Wheel True With Relpacement Spoke (not tubeless)

We’ll remove the tyre and tube, replace the damaged spoke, and tension the wheel so it runs true again. A cost-effective repair for everyday wheel issues.

Wheel Trued for Correct Alignment

A buckled or wobbly wheel makes riding unpleasant and can damage other components. We’ll tension and realign the spokes to bring your wheel back into shape, improving both performance and longevity.

Headset Fit/Replacement

A knocking front end or stiff steering often means your headset bearings are worn. We’ll remove the old headset, clean the frame, install new bearings and preload the system for silky-smooth handling and confident cornering.

Hydraulic Brake Bleed (per brake)

If your brakes feel spongy or inconsistent, it might be time for a bleed. We’ll flush out the old fluid, remove any air bubbles, and refill with fresh, high-quality brake fluid giving you sharp, reliable stopping power again.

Internal Brake or Gear Cable Fit

Whether it’s a gear or brake cable, a snapped cable can leave your bike unrideable. We’ll replace the inner and check the outer housing, refit and adjust everything so you’re back in full control – no hassle, no fuss.

Hub service - Single

If your wheels feel rough when spinning or make clicking sounds, the hub bearings could be worn. We’ll replace them with fresh sealed or loose ball bearings, depending on the hub, and adjust everything for a smooth, free-spinning wheel.

Bottom Bracket service

Strange noises or play in your cranks? Nobody likes a creaky bike! We’ll inspect, clean and re-grease your bottom bracket – or remove and replace it if necessary. A smooth BB means more efficient pedalling and fewer annoying creaks.

External Brake or Gear Cable Fit

Whether it’s a gear or brake cable, a snapped cable can leave your bike unrideable. We’ll replace the inner and check the outer housing, refit and adjust everything so you’re back in full control – no hassle, no fuss.

Brake Tune up (pair)

Weak brakes? We’ll adjust your brake pads, align calipers, and check cable tension and condition to ensure consistent stopping power. Whether it’s V-brakes or discs, we’ll make sure you’re braking safely and smoothly.

Gear tune up

Gears skipping, crunching, or just not quite right? We’ll carefully adjust your gear indexing, check cable tension and condition of your setup. Fine-tune shifting for smooth, crisp gear changes, essential for safe and enjoyable riding around the South West's hills and trails.

Tubeless Tyre set up (per tyres)

Want fewer punctures and a smoother ride? We’ll convert your wheels to tubeless or refresh an old setup. That includes fitting tubeless rim tape, installing valves, adding fresh sealant, and seating your tyres to get a solid airtight seal. Perfect for road, gravel and mountain bikes – especially if you ride the rugged terrain around Portishead and the South West. Ride lower pressures, reduce flats, and enjoy more grip and comfort.