Please edit your services to reflect what you offer and fully customise the description and prices accordingly. If you operate less than three levels of service, please look at our pre-selected items, and decide what level your services match. You can remove a level by simply unticking it.

Service Packages

    A Great General all round Service for your bike. 

General Service

Clean and insect saddle rails/clamps. Adjust position if needed

Saddle

Check saddle for wear/damage

Ensure any accessories are safe/secure

Accessories

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Frame/Fork

Inspect headset for wear/corrosion, adjust

Handlebar/Headset/Stem

Inspect handlebar for wear/damage, check torque

Inspect spoke tension and true lateral/radial as appropriate

Wheels/Tyres

Inspect condition of hose/cable

Brakes (Brake & Pad Type)

Inspect caliper for correct function including clean/lube pistons

Inspect brake rotor for wear/damage/torque

Inspect chain rings/crank arms/spindle for wear/damage

Bottom Bracket/Cranks

Inspect pedal body for wear/damage

Pedals

Inspect chain for wear/damage lubricate

Drivetrain/Gears

Inspect rear derailleur cable/electronic wire for wear/damage

Set rear derailleur upper/lower limits and b-tension

Inspect front derailleur for wear/damage

Set front derailleur upper/lower limits

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar tape/grips for wear/damage

Inspect spokes and rim for wear/damage

Inspect tyres for condition and wear

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of brake pads

Inspect condition of hydraulic fluid if applicable

Adjust brake, ensure correct function including no rub and appropriate bite-point

Inspect bottom bracket torque, ensure free rotation of bearings

Install crankset, ensure smooth running/no play

Ensure smooth rotation of pedal bearings and check for play

Inspect cassette for wear/damage and torque

Ensure derailleur hanger is straight and secure

Inspect rear derailleur for wear/damage

Adjust rear derailleur indexing

Set front derailleur position/height

Adjust front derailleur indexing

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

We carry out exactly the same checks/adjustments as the General Service but at the slightly higher (but still very reasonable) cost of £55.00. Brompton's require a little bit more time than non folding bikes.
We use Brompton parts where available.

Brompton Service

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

We do everything included with our General Service, but the work takes a lot longer to do with fully enclosed chains etc. 

Dutch Bike Service(Hub Gears,enclosed chains,drum brakes,back pedal brakes)

Select what extras or individual services you offer. If you don’t have a set price, you can select "Price on request"

Other Services

All Nuts & Bolts Checked for Tightness

Bicycle Build – Adult

Bicycle Damage Report for Insurance Companies

Bottom Bracket Fit

Brakes Adjusted & Tested

Cassette Replacement & Fit

Chain Replacement & Fit

Derailleur Hanger Straightened

External Brake or Gear Cable Fit

Fit Handlebar Tape

Fit Tubular Tyre

Gears Adjusted & Tested

Headset Fit

Hubs Adjusted for Play

Hydraulic Brake Bleed(Per Brake)

Internal Brake or Gear Cable Fit

Replace Disc Brake Pads(Per Brake)

Replace Rim Brake Pad

Service Headset

Service Hub - Single

Spoke Tensions Balanced & Wheels Re-trued for Alignment

Tyres Inflated to Correct Pressures & Inspected for Wear

Wheel True With Spoke

Wheels Trued for Correct Alignment

Bicycle Build - Child

Headset & Crank Bottom Bracket Adjusted

Puncture Repair Including Inner Tube(Standard Geared Bikes)

Update electronic drivetrain firmware

Charge/replace electronic drivetrain batteries

Inspect tubeless system, top-up or replace consumables as appropriate

Clean and inspect bottom bracket shell threads if appropriate

Inspect and regrease pedal/crankarm threads

Inspect / adjust suspension linkages (if required)

Suspension forks, clean/inspect seals and upper tubes. Check for function

Introducing Workshop

About us

Hours

Bikebook Reviews