Please edit your services to reflect what you offer and fully customise the description and prices accordingly. If you operate less than three levels of service, please look at our pre-selected items, and decide what level your services match. You can remove a level by simply unticking it.

Service Packages

RUD-FS-002 - Inspect fork condition, remove air spring assembly and replace air seals. Remove damper and fit new seals and premium oils and grease.  Clean lower leg assembly and check lower leg bushes for wear.  Replace dust wiper seal, foam rings and premium oils and grease.  Test on hand dyno

FORK LOWER LEG, AIR SPRING AND DAMPER SERVICE 

FREIGHT

To disconnect and remove shock from frame. 
Disassemble shock and inspect inc damper.  Remove and replace seals as required.  Reassemble using premium grease and oils.  Recharge with nitrogen.  Test on hand dyno.  Refit to frame. 


SHOCK FULL DAMPER SERVICE 

RUD-SHACSRV-110   To remove shock from frame, disassemble and inspect. Remove and replace air can seals.  Reassemble using premium oils and grease. Test on hand dyno.

SHOCK FULL DAMPER SERVICE AIR CAN

Basic 50 hour service To disconnect and remove shock from frame. Remove and replace seals as required.  Reassemble using premium grease and oils.  Recharge with nitrogen.  Test on hand dyno.  Refit to frame. 


SHOCK BASIC AIR CAN SERVICE 

To press out steer tube, clean as necessary and refit. 

STEER TUBE

FORESTRY SA 

RUD-LLR-005       Lower leg bush realignment                          $60.00



LOWER LEG BUSH REALIGNMENT

Remove fork from bike (brand new bike) Inspect fork condition and remove air spring assembly.
Clean lower leg assembly and check lower leg bushes for wear.   Replace lower leg dust wiper seals, foam rings and premium oils and grease.  Test on hand dyno. Refit to bike.


FORK LOWER LEG AND AIR SPRING SERVICE 

DATA ACQUISITION TUNE 

A standard service is recommended every 12 Month.

Standard Service

Update electronic drivetrain firmware

Drivetrain/Gears

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Saddle

Clean and insect saddle rails/clamps. Adjust position if needed

Check saddle for wear/damage

Ensure any accessories are safe/secure

Accessories

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Fork

Inspect headset for wear/corrosion, adjust

Handlebar/Headset/Stem

Inspect handlebar for wear/damage, check torque

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

Wheels/Tyres

Inspect spoke tension and true lateral/radial as appropriate

Inspect tubeless system, top-up or replace consumables as appropriate

Inspect condition of hose/cable

Brakes (Brake & Pad Type)

Inspect brake rotor for wear/damage/torque

Inspect chain rings/crank arms/spindle for wear/damage

Bottom Bracket/Cranks

Inspect pedal body for wear/damage

Pedals

Inspect and regrease pedal/crankarm threads

Inspect chain for wear/damage lubricate

Inspect rear derailleur cable/electronic wire for wear/damage

Set rear derailleur upper/lower limits and b-tension

Inspect front derailleur for wear/damage

Set front derailleur upper/lower limits

Inspect / adjust suspension linkages (if required)

Suspension forks, clean/inspect seals and upper tubes. Check for function

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar tape/grips for wear/damage

Inspect spokes and rim for wear/damage

Inspect tyres for condition and wear

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of brake pads

Adjust brake, ensure correct function including no rub and appropriate bite-point

Inspect bottom bracket torque, ensure free rotation of bearings

Install crankset, ensure smooth running/no play

Ensure smooth rotation of pedal bearings and check for play

Inspect cassette for wear/damage and torque

Ensure derailleur hanger is straight and secure

Inspect rear derailleur for wear/damage

Adjust rear derailleur indexing

Set front derailleur position/height

Adjust front derailleur indexing

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

Introducing Workshop

About us

Hours

Bikebook Reviews