Please edit your services to reflect what you offer and fully customise the description and prices accordingly. If you operate less than three levels of service, please look at our pre-selected items, and decide what level your services match. You can remove a level by simply unticking it.

Service Packages

A Gold Service is Recommended Every 100+ Hours of Riding 
(Parts Not Included)
Full Hand Wash of Bike
Safety Check and Inspection
Complete Strip and All Parts Removed From Frame
All Parts Striped Cleaned Rebuilt and Lubricated. Replacement Components Fitted if Required
Wheels Inspected for Spoke Tension, Lateral and Radial True. All Adjusted to Manufactures Specification
Hubs Inspected, Set Up and Adjusted, Bearings Replaced if Required
Parts Reinstalled on Frame
Headset Inspected, Set Up and Adjusted. Bearings Replaced if Required
Bottom Bracket Inspected, Set Up and Adjusted Bearings Replaced if Required
Gears Set Up and Adjusted. Electronic Group-Set Battery Charged and Firmware Update if Required
Brakes Set Up and Adjusted. Hydraulic Systems are Bled and Bite Point Set to Customer Requirements
Pedals Inspected Set Up and Adjusted Bearings Replaced if Required
Bar Tape Replaced if Requested 
Tyres Inflated and Changed if Required
Drive-Train Lubricated
Full Nut and Bolt Torque and check
Test Ride

Gold Service

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

Inspect / adjust suspension linkages (if required)

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Suspension forks, clean/inspect seals and upper tubes. Check for function

Inspect headset for wear/corrosion, adjust

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar for wear/damage, check torque

Inspect handlebar tape/grips for wear/damage

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

Inspect spokes and rim for wear/damage

Inspect spoke tension and true lateral/radial as appropriate

Inspect tyres for condition and wear

Inspect tubeless system, top-up or replace consumables as appropriate

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of hose/cable

Inspect condition of brake pads

Inspect caliper for correct function including clean/lube pistons

Inspect condition of hydraulic fluid if applicable

Inspect brake rotor for wear/damage/torque

Adjust brake, ensure correct function including no rub and appropriate bite-point

Clean and inspect bottom bracket shell threads if appropriate

Inspect bottom bracket torque, ensure free rotation of bearings

Inspect chain rings/crank arms/spindle for wear/damage

Install crankset, ensure smooth running/no play

Inspect pedal body for wear/damage

Ensure smooth rotation of pedal bearings and check for play

Inspect and regrease pedal/crankarm threads

Inspect cassette for wear/damage and torque

Inspect chain for wear/damage lubricate

Ensure derailleur hanger is straight and secure

Inspect rear derailleur cable/electronic wire for wear/damage

Inspect rear derailleur for wear/damage

Set rear derailleur upper/lower limits and b-tension

Adjust rear derailleur indexing

Inspect front derailleur for wear/damage

Set front derailleur position/height

Set front derailleur upper/lower limits

Adjust rear gears 

Update electronic drivetrain firmware

Charge/replace electronic drivetrain batteries

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Clean and insect saddle rails/clamps. Adjust position if needed

Check saddle for wear/damage

Ensure any accessories are safe/secure

All Parts removed from Frame and Cleaned in Parts Washer

Wheels Trued and spokes tensioned on Jig using manufacurers specification

chainset fitted 

BB and Cranks Removed and cleaned in parts Washer Bearings replaced if required

Parts removed from bike and cleaned 

Bearings replaced if required

Removed from bike and cleaned - bearings replaced if required

Deraileur diassembled to component level - cleaned in parts washer - full service as required inc replacing springs and jockey wheels/bearings

Levers inspected and serviced as required including replacing cable guide tracks and covers

cable change 

Brake Bleed (rear)

Brake replacement 

Fork service 

A Silver Service is Recommended Every 75+ Hours of Riding
(Parts Not Included)
Full Hand Wash of Bike
Safety Check and Inspection
Drive-Train Removed, Striped, Cleaned and Lubricated. Replacement Components Fitted if Required
Wheels Inspected for Spoke Tension, Lateral and Radial True. All Adjusted to Manufactures Specification
Hubs Inspected, Set Up and Adjusted, Bearings Replaced if Required
Parts Reinstalled on Frame
Headset Inspected, Set Up and Adjusted. Bearings Replaced if Required
Bottom Bracket Inspected, Set Up and Adjusted Bearings Replaced if Required
Gears Set Up and Adjusted. Electronic Group-Set Battery Charged and Firmware Update if Required
Brakes Set Up and Adjusted. Hydraulic Systems are Bled and Bite Point Set to Customer Requirements
Pedals Inspected Set Up and Adjusted. Bearings Replaced if Required
Tyres Inflated and Changed if Required
Full Nut and Bolt Torque and Check
Test Ride

Silver Service

A Bronze service is recommended every 30+ hours of riding
(Parts Not Included)
Safety Check and Inspection
Wheels Inspected for Spoke Tension, Lateral and Radial True
Hubs Inspected, Set Up and Adjusted
Headset Inspected, Set Up and Adjusted
Bottom Bracket Inspected, Set Up and Adjusted
Brakes Set Up and Adjusted
Gears Set Up and Adjusted
Pedals Inspected
Tyres Inspected for Damage and Inflated
Drive-Train Lubricated
Full Nut and Bolt Torque and Check
Test Ride

Bronze Service

TM - freed up freehub
RG - Adjusted brakes and gears
Chain is worn 
Gears shift OK  - shifters are a little stiff

Assessment

Recommend Before a Race, Event or Trip to Ensure the Bike is Safe, Ready and Tuned to the Riders Specifications
Safety Check of the Cycle 
All Torque Settings of the Bike Checked, Set Up and Adjusted
Drive-Train Lubricated
Tyres Checked for Damage and Inflated
Test Ride
If You Have Any Specific Adjustments for Your Bike Please Ask

Pre Race Check

Here you can customise your electric bike services. Please follow the same process as above because these will be displayed separately to your standard services.

EBike Service Packages

A Gold Service is Recommended Every 100+ Hours of Riding 
(Parts Not Included)
Full Hand Wash of Bike
Safety Check and Inspection
Complete Strip and All Parts Removed From Frame
All Parts Striped Cleaned Rebuilt and Lubricated. Replacement Components Fitted if Required
Wheels Inspected for Spoke Tension, Lateral and Radial True. All Adjusted to Manufactures Specification
Hubs Inspected, Set Up and Adjusted, Bearings Replaced if Required
Parts Reinstalled on Frame
Headset Inspected, Set Up and Adjusted. Bearings Replaced if Required
Bottom Bracket Inspected, Set Up and Adjusted Bearings Replaced if Required
Gears Set Up and Adjusted. Electronic Group-Set Battery Charged and Firmware Update if Required
Brakes Set Up and Adjusted. Hydraulic Systems are Bled and Bite Point Set to Customer Requirements
Pedals Inspected Set Up and Adjusted Bearings Replaced if Required
Bar Tape Replaced if Requested 
E- Software / Firmware Update and Diagnostic
Battery Removal and Inspection
Motor Removal and Inspection
Tyres Inflated and Changed if Required
Drive-Train Lubricated
Full Nut and Bolt Torque and check
Test Ride

Electric Gold Service

A Silver Service is Recommended Every 75+ Hours of Riding
(Parts Not Included)
Full Hand Wash of Bike
Safety Check and Inspection
Drive-Train Removed, Striped, Cleaned and Lubricated. Replacement Components Fitted if Required
Wheels Inspected for Spoke Tension, Lateral and Radial True. All Adjusted to Manufactures Specification
Hubs Inspected, Set Up and Adjusted, Bearings Replaced if Required
Parts Reinstalled on Frame
Headset Inspected, Set Up and Adjusted. Bearings Replaced if Required
Bottom Bracket Inspected, Set Up and Adjusted Bearings Replaced if Required
Gears Set Up and Adjusted. Electronic Group-Set Battery Charged and Firmware Update if Required
Brakes Set Up and Adjusted. Hydraulic Systems are Bled and Bite Point Set to Customer Requirements
Pedals Inspected Set Up and Adjusted. Bearings Replaced if Required
E- Software / Firmware Update and Diagnostic
Battery Removal and Inspection
Tyres Inflated and Changed if Required
Full Nut and Bolt Torque and Check
Test Ride

Electric Silver Service

A Bronze service is recommended every 30+ hours of riding
(Parts Not Included)
Safety Check and Inspection
Wheels Inspected for Spoke Tension, Lateral and Radial True
Hubs Inspected, Set Up and Adjusted
Headset Inspected, Set Up and Adjusted
Bottom Bracket Inspected, Set Up and Adjusted
Brakes Set Up and Adjusted
Gears Set Up and Adjusted
Pedals Inspected
E- Software / Firmware Update and Diagnostic
Battery Removal and Inspection
Tyres Inspected for Damage and Inflated
Drive-Train Lubricated
Full Nut and Bolt Torque and check
Test Ride

Electric Bronze Service

If you offer bike fittings you can customise the price and description here.

Fittings

Help to optimize comfort, performance and efficiency.

Bike Fitting

Select what extras or individual services you offer. If you don’t have a set price, you can select "Price on request"

Other Services

All Nuts & Bolts Checked for Tightness

ride wrap

boost e bike conversion

Custom Build 

Battery Capacity Test

Bicycle Damage Report for Insurance Companies

Bike Polish and Clean. From £20 Depending on Current State of Cycle

Bottom Bracket Fit

Bottom Bracket Removal. Price From £15

Boxing Bike for Traveling via Plane

Brake Bleed (Per Brake) Price From: £25

Caliper / V Brake adjustment

Cassette Replacement & Fit

Chain Replacement & Fit

Complete Headset Fit. Price From: £25 (Internally Routed Cable Headset Listed Separetely)

Derailleur Hanger Straightened

Drivetrain will be removed, cleaned, checked for wear or damage, put back on the bike if parts are in working condition, and it will be adjusted to ensure the perfect ride. After it will receive a test ride to gaurentee the bike is good to go.

Drivetrain Service - Items Cleaned, Inspected, Adjusted and Checked

External Brake or Gear Cable Fit (per cable)

Fit Handlebar Tape

Fit Tubeless Tyre

Fit Tube Type Tyre 

Frame Threads Reamed & Faced

Full Custom Bike Build. Starting From: £150

Gears Service

Hubs Adjusted for Play

Dependant on frame type and location of cable fitted.

Internal Brake or Gear Cable Fit (Per Cable)

Internally Routed Cable Headset, Headset fit

New Bicycle Build – Adult

New Bicycle Build - Child

Pad Fit / Caliper Alignment (per caliper)

Rear Mech Hanger Replacement

Replace Disc Brake Pads

Replace Rim Brake Pad

Service Front Hub

Service Rear Hub

Service - Suspension (Forks)

Service – Suspension (Rear)

Software Update & Diagnostic Report

Tyres Inflated to Correct Pressures

Wheel Build - Pair

Wheel Build - Single

Wheel Trued, Tensioned and Correctly Alignment in Jig (Per Wheel) Price From: £20

Introducing Workshop

OTEC BIKES

About us

Hours

What we offer

Bikebook Reviews