Winterisation

Software update/upgrade

full strip down, deep clean, part replacement and rebuild

A full comprehensive strip down and rebuild of the bike, cleaning, inspecting and servicing parts/componentry as required

electrical system

Standard Service (Customer)

A standard service is recommended every 12 Month.

Service on Assessment

Get your bike assessed and then receive a quote.

Both brake caliper pistons lubricated

spoke replacement

A replacement of a spoke in a wheel due to damage to the spoke

Hub bearings replaced

A full replacement of worn/damaged hub bearings for new ones

Hydraulic brake bleed (FULL)

A full bleed of the brake including complete flush out and replacement of hydraulic fluid

replace handlebars

replacement of handlebars

Sealent top up

a topping up of sealant due to low levels

Gear indexing adjustment/tune-up

Replace gear cable inner and outer

Replace the left or right shifter

Replace road/cross bike shift lever and rewrap tape on drop bars

Replace the crank arm

Replace BAFANG front chainring

Shorten/lengthen chain

Replace chain

Fit and set up new mech (Derailleur)

Fit new disc brake (hydraulic)

Replace cassette/Freewheel

Straighten the derailleur hanger (where possible)

Fit new derailleur hanger and index gears

Freehub body replacement

Freehub body service (Includes bearing clean)

Fit new disc brake (cable)

Replace disc brake pads (front or rear only)

Replace disc brake pads (full bike)

Clean / recondition disc rotor (per brake)

Bleed disc brake – Shimano (per brake)

Replace disc rotor

Bleed disc brake – Avid/Formula/Hayes (per brake)

Shorten existing disc brake hose – Includes brake bleed

Replace disc brake hose – Includes brake bleed

Replace disc brake lever – Includes brake bleed

Replace disc brake calliper – Includes brake bleed

Adjust cable brake (front or rear only)

Replace brake blocks and adjust brakes (front or rear only)

Fit new MTB / Hybrid cable brake (V Brake or canti)

Fit new road / cross bike brake lever and rewrap bar tape

Replace brake blocks and adjust brakes (front and rear)

Fit new MTB / Hybrid cable brake (disc)

Fit new road / cross bike cable disc brake

Replace brake cable inner (front or rear only)

Replace brake cable inners (full bike)

Replace brake cable inner and outer (front or rear only)

Replace brake cable inners and outers (full bike)

Fit new road bike caliper or cross bike canti brake

Fit front or rear tube type tyre and/or tube replacement

Fit front or rear tubeless tyre and/or sealant replacement

Fit tubeless tyre – including tape and sealant

Puncture repair including tyre removal and refitting

Front wheel build

Freehub body replacement

Rear wheel build

Wheel build pair

Replace spoke during trueing – per spoke

True wheel (front or rear)

Rim replacement on existing wheel

Hub replacement on existing wheel

Tyre removal and refitting for wheel true

Cassette removal and refitting for wheel true

Ball bearing clean and new grease (front or rear)

Hub cartridge bearing replacement

Adjust hub bearing cones (front or rear)

Freehub body service (includes rear bearing clean)

Adjust headset

Fit new headset (onto bare frame)

Remove old headset, fit new, and re-install forks

Replace headset bearings (loose or caged bearings)

Replace headset bearings (cartridge type)

Fit headset compression starnut

Fit new bottom bracket (onto bare frame)

Remove and replace bottom bracket

Clean and replace bottom bracket bearings

Clean/re-tap bottom bracket threads

Face bottom bracket shell

Frame pivot bearing replacement

Frame pivot bearing replacement

Fit replacement flat handlebars and reinstall brake levers and shifters.

Fit replacement road / drop handlebars and reinstall tape and brake and shift levers.

Fit replacement or reinstall handlebar grips

Fit replacement or reinstall handlebar tape

Fit replacement stem

Fit replacement saddle/seatpost

Seized seatpost removal

Pedal fitting and/or removal

Pedal cleat fitting

Pedal cleat removal (seized bolts)

Pedal servicing & bearing replacements

New frame (parts swapped over from existing bike)

Custom bike build (New parts built up to your spec)

New bike – ‘Out of the box’ bike assembly

Straighten rear mech hanger (where possible)

Fit front pannier rack

New bike – Set up and safety check

Bike disassembly and packing for courier or travel

Fit new forks

Suspension fork removal and refit for servicing

Clean/re-tap bottom bracket threads

Face bottom bracket shell

Re-tap existing threads (bottle bosses etc.)

Check and adjust dropout alignment (where possible)

Other frame repairs

Fit mudguards (Crud Catcher type)

Fit full mudguards (traditional style)

Fit rear pannier rack

Fit pannier bags

Fit lights (front and/or rear)

Fit and set up cycle computer

Software Update

Clean electrical motor and battery contacts

Disk replacement

Replace rim brake pads

Drivetrain degrease/inspection

full cleaning of drivetrain and inspection for wear of componentry

Rear mech replaced

A new rear derailleur is fitted, gears indexed, limit screws and b-tension set

Chain Replaced

Anew chain sized to correct length and fitted