Wedding

Please edit your services to reflect what you offer and fully customise the description and prices accordingly. If you operate less than three levels of service, please look at our pre-selected items, and decide what level your services match. You can remove a level by simply unticking it.

Service Packages

The bike will be fully stripped, all components serviced in house (*All suspension sent to either TF Tuned or Silverfish, which will be sorted and sent in house).
Bike then rebuilt, new components added where necessary :) 
*Parts not included  

Full Suspension MTB (platinum service)

Wrap bought by KBT... 
£105
Wrap not bought by KBT...
£115

Invisifame wrap - Full suspension MTB

Wrap bought by KBT...
£75 
Wrap not bought by KBT... 
£85

Invisifame wrap -  Road, gravel or hardtail MTB

If the group set is purchased through KBT, fitting will be £100.  I can get all of your main groupsets including Shimano, Sram an Campagnolo. 
Whilst the bike is apart it is a good time to service/replace any consumables :)  

New groupset purchase and installation

All bearings serviced or replaced where required.
Full cable change.
Full de-grease.
Any parts changed where required. 

Premium service (rim brake)

A premium service is recommended every 18-24 Months.  This is where the bike is fully stripped down to frame and components and rebuilt.  All consumable parts serviced/replaced where required.  
*Parts not included

Premium Service (internally routed headset)

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

Inspect / adjust suspension linkages (if required)

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Suspension forks, clean/inspect seals and upper tubes. Check for function

Inspect headset for wear/corrosion, adjust

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar for wear/damage, check torque

Inspect handlebar tape/grips for wear/damage

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

Inspect spokes and rim for wear/damage

Inspect spoke tension and true lateral/radial as appropriate

Inspect tyres for condition and wear

Inspect tubeless system, top-up or replace consumables as appropriate

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of hose/cable

Inspect condition of brake pads

Inspect caliper for correct function including clean/lube pistons

Inspect condition of hydraulic fluid if applicable

Inspect brake rotor for wear/damage/torque

Adjust brake, ensure correct function including no rub and appropriate bite-point

Clean and inspect bottom bracket shell threads if appropriate

Inspect bottom bracket torque, ensure free rotation of bearings

Inspect chain rings/crank arms/spindle for wear/damage

Install crankset, ensure smooth running/no play

Inspect pedal body for wear/damage

Ensure smooth rotation of pedal bearings and check for play

Inspect and regrease pedal/crankarm threads

Inspect cassette for wear/damage and torque

Inspect chain for wear/damage lubricate

Ensure derailleur hanger is straight and secure

Inspect rear derailleur cable/electronic wire for wear/damage

Inspect rear derailleur for wear/damage

Set rear derailleur upper/lower limits and b-tension

Adjust rear derailleur indexing

Inspect front derailleur for wear/damage

Set front derailleur position/height

Set front derailleur upper/lower limits

Adjust front derailleur indexing

Update electronic drivetrain firmware

Charge/replace electronic drivetrain batteries

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Clean and insect saddle rails/clamps. Adjust position if needed

Check saddle for wear/damage

Ensure any accessories are safe/secure

Newmen X12 148mm Thru Axle Rear

Chain replaced

Dropper post re cable

Change gear cable

Groupset

A basic service is recommended every 6 Months, after a period of not using the bike or if you feel something is wrong with the bike.   

Basic Service

A standard service is recommended every 12 Month.

Standard Service

Headset change (internal design)

Plus evaluation of further work required

Wheel bearing service 

Drop in service (bottom bracket change/gear cable change and index/mech hanger alignment) from

With bikes being made from carbon now, breakages are unfortunately more prevalent than ever.  Therefore I offer a carbon repair service.  This involves me stripping the bike down and keeping all the components.  I then would arrange getting the frame taken to the best carbon repairer in the area, Vic for assessment and repair (he would work closely with you to make sure you got exactly what you wanted for the price you want)!
The bike would then be returned to me for rebuilding :) 
*Parts not included    

Carbon damage/crash repair service (strip down and rebuild)

BB replaced 

Bottom bracket replaced 

Headset replaced

New Headset

Bar tape replacment

New mech hanger

Fork Repair

Brake caliper replacment 

Tyres replaced

Sram bettery replacment  

Wheel rebuild

Frame Repair

Wheel service

Tyre sealant added 

Brake bleed/caliper service 

Calipers need dismanteling and servicing 

Change Brake cables

Aditional labour

Wheel service x2

Add tyre sealant 

New Cassette 

Wheel rebuilt 

Labour charge from KBT

Mech hanger alignment

Bar tape added

Spare cassette purchased

Service wheels

New brake pads

New chain 

Gear cable replacment

Spare inner tube

Tyre sealant added

Various bolts tightened and bike cheched over/gears indexed :)

Service charge :)

Replacment Spokes

Labour 

Brakes bled 

Replaced chain and cassette 

New Groupset 

Spare tyres

All wheel bearings serviced :)

Chain replaed

Charged

Shimano crank inspection

Caliper pistons cleaned and lubed, calliper bolts cleaned and greased too.  New pads also installed :) 

Introducing Workshop

Kierens Bike Tech

About us

Hours

What we offer

Bikebook Reviews