Please edit your services to reflect what you offer and fully customise the description and prices accordingly. If you operate less than three levels of service, please look at our pre-selected items, and decide what level your services match. You can remove a level by simply unticking it.

Service Packages

A premium service is recommended every 18-24 Months.

£50 hourly labour charge, usually 4-5 hours depending on the condition of your bike

This is a full and comprehensive strip down of the bike to clean and degrease every part of it. Your whole bike will receive a complete makeover and will ride as new.  We will replace worn parts as necessary, seeking authorisation if the repair cost is going to be in excess of £400 total. Our mechanic will test ride the bike to prove function and you will receive a full breakdown of all the work that's been carried out for your records.

Suspension servicing is an option on demand.

Premium Service

Update electronic drivetrain firmware

Drivetrain/Gears

Charge/replace electronic drivetrain batteries

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Saddle

Clean and insect saddle rails/clamps. Adjust position if needed

Check saddle for wear/damage

Ensure any accessories are safe/secure

Accessories

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Frame/Fork

Inspect headset for wear/corrosion, adjust

Handlebar/Headset/Stem

Inspect handlebar for wear/damage, check torque

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

Wheels/Tyres

Inspect spoke tension and true lateral/radial as appropriate

Inspect tubeless system, top-up or replace consumables as appropriate

Inspect condition of hose/cable

Brakes (Brake & Pad Type)

Inspect caliper for correct function including clean/lube pistons

Inspect brake rotor for wear/damage/torque

Clean and inspect bottom bracket shell threads if appropriate

Bottom Bracket/Cranks

Inspect chain rings/crank arms/spindle for wear/damage

Inspect pedal body for wear/damage

Pedals

Inspect and regrease pedal/crankarm threads

Inspect chain for wear/damage lubricate

Inspect rear derailleur cable/electronic wire for wear/damage

Set rear derailleur upper/lower limits and b-tension

Inspect front derailleur for wear/damage

Set front derailleur upper/lower limits

Inspect / adjust suspension linkages (if required)

Suspension forks, clean/inspect seals and upper tubes. Check for function

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar tape/grips for wear/damage

Inspect spokes and rim for wear/damage

Inspect tyres for condition and wear

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of brake pads

Inspect condition of hydraulic fluid if applicable

Adjust brake, ensure correct function including no rub and appropriate bite-point

Inspect bottom bracket torque, ensure free rotation of bearings

Install crankset, ensure smooth running/no play

Ensure smooth rotation of pedal bearings and check for play

Inspect cassette for wear/damage and torque

Ensure derailleur hanger is straight and secure

Inspect rear derailleur for wear/damage

Adjust rear derailleur indexing

Set front derailleur position/height

Adjust front derailleur indexing

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

£50 hourly charge, approximately 2-3 hours depending on condition of your bike

Treat your bike to a thorough check over: We will semi strip the bike to degrease the moving parts. We will work through the entire bike to check and adjust the tension and settings, replacing any worn parts as necessary. We will seek your authorisation if the repair cost is going to be in excess of £200 total. You will receive a full report of our work, and a test ride from our mechanic will prove function on the road as well as the stand.

Standard Service

This is a basic service recommended every 6 to 8 months for regular users, or dependent on usage. It covers all the working parts but does not include stripping the bike down, cleaning or degreasing. It does include the following:

Frame and fork inspected for damage and alignment
Headset and bottom bracket are checked for play and adjusted as necessary / if possible
Wheel hubs are checked for play and adjusted as necessary. Wheels checked for true.
Gears and brakes are adjusted and aligned.
Moving parts are oiled.  Nuts and bolts checked, chain lubricated and tyres inflated.
The replacement of cables and brake cables is common in a service and will greatly improve shifting and braking performance. The fitting and cost of these is not included in a general service. Replacement of headsets, bottom brackets and wheel truing is not included.

Basic Service

Get your bike assessed and then receive a quote.

Service on Assessment

Select what extras or individual services you offer. If you don’t have a set price, you can select "Price on request"

Other Services

Bicycle Damage Report for Insurance Companies

Bottom Bracket Fit

Brakes Adjusted & Tested

Derailleur Hanger Straightened

All Nuts & Bolts Checked for Tightness

Battery Capacity Test

Bicycle Build - Child

Bicycle Build – Adult

Cassette Replacement & Fit

Chain Replacement & Fit

Complete Strip Down & Rebuild

Drivetrain Service - Items Cleaned, Inspected, Adjusted and Checked

External Brake or Gear Cable Fit

Fit Handlebar Tape

Fit Tubeless Tyre

Fit Tubular Tyre

Frame Threads Reamed & Faced

Gears Adjusted & Tested

Headset & Crank Bottom Bracket Adjusted

Headset Fit

Hubs Adjusted for Play

Hydraulic Brake Bleed

Internal Brake or Gear Cable Fit

Puncture Repair Excluding Inner Tub

Puncture Repair Including Inner Tube

Rear Mech Hanger Replacement

Replace Disc Brake Pads

Replace Rim Brake Pad

Service - Suspension (Forks)

Service – Suspension (Rear)

Service Headset

Service Hub - Single

Software Update & Diagnostic Report

Spoke Tensions Balanced & Wheels Re-trued for Alignment

Tyres Inflated to Correct Pressures & Inspected for Wear

Wheel Build - Pair

Wheel Build - Single

Wheel True With Spoke

Wheels Trued for Correct Alignment

Introducing Workshop

About us

Hours

Bikebook Reviews