Suspension Servicing

Clean down dropper and seals .
grease and lube seals 
bleed and set air pressure 

Dropper service and bleed

Lowers strip down, check for wear, fresh oil and cleaned. Free fitting  on seals when purchased in store. (seals extra)

Lower Service

clean and inspect dropper
check air pressure
lube stanchion
replace cable

Dropper cable replce

Full strip down, check for wear, new o-rings, fresh oil and cleaned. Free fitting  on seals, dampers and springs when purchased in store. (seals and other parts are extra)

Suspension Service (Full)

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

Frame/Fork

Inspect / adjust suspension linkages (if required)

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Suspension forks, clean/inspect seals and upper tubes. Check for function

Can cleaned, check for wear, fresh oil and seals replaced if needed.
(seals extra)


Can Service 

Reverb Bleed

Wheel Servicing

inspection of hub
removal of old bearings, clean and re greased as necessary.
New bearings fitted 
Bearings are priced individually.  

Hub Service

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

Wheels/Tyres

Removing old tyres
Fitting new tyres and tubeless valve and rim tape if needed.
fitting sealant and beading the tyre


Tubeless set up 

Inspect tyres for condition and wear

Inspect tubeless system, top-up or replace consumables as appropriate

fitting new tyres to a standard bike and recycling the old tyres.
recycling cost included.
£8.00 per wheel.

Tyre fitting

Inspect spokes and rim for wear/damage

Inspect condition of brake pads

Brakes (Brake & Pad Type)

Adjust brake, ensure correct function including no rub and appropriate bite-point

Wheel trued, full tensioned, if spokes need replacing extra cost may apply.

Wheel Tru and Tensioned.  

Spoke length calculated, and wheel laced to your own liking! Two months guarantee

Wheel build 

Wheels Trued plus spoke fitting

Gear Servicing

Gear Service

Inspect cassette for wear/damage and torque

Drivetrain/Gears

Inspect chain for wear/damage lubricate

Ensure derailleur hanger is straight and secure

Inspect rear derailleur cable/electronic wire for wear/damage

Inspect rear derailleur for wear/damage

Set rear derailleur upper/lower limits and b-tension

Adjust rear derailleur indexing

Inspect front derailleur for wear/damage

Set front derailleur position/height

Set front derailleur upper/lower limits

Adjust front derailleur indexing

Hot wax

When purchased in store, drive chain fitted and set up.

Drive Chain Fit

Remove old Bottom bracket
Clean and prep frame.
fit new Bottom Bracket with appropriate grease .
fit and torque up crank set.

Bottom Bracket Fit/ replace

Gears Adjusted & Tested

extra labour charge to cover time consuming cable routes and  possible removal of parts 

Internal Brake or Gear Cable Fit

Replace Brocken or bent mech hanger
fit rear derailleur and adjust gears

Rear Mech Hanger Replacement

Gear cable re tensioned and setup, limit screws checked on both mechs and chain lubed. 



Gear Index

Brake Servicing

Fit pads

Brake cable re tensioned, pads adjusted and checked. 

Cable Brakes Set Up 

New fluid add and old fluid fleshed out with any air bubbles.  

Brake Bleed

Full bleed plus lever and calliper striped and rebuild.

Brake Service

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of hose/cable

Inspect caliper for correct function including clean/lube pistons

Inspect condition of hydraulic fluid if applicable

Inspect brake rotor for wear/damage/torque

Please edit your services to reflect what you offer and fully customise the description and prices accordingly. If you operate less than three levels of service, please look at our pre-selected items, and decide what level your services match. You can remove a level by simply unticking it.

Bike Servicing

All of above plus, all bearing points cleaned &amp; serviced new bearings fitted if needed (bearings extra) and any major parts fitted for free when purchased in store.

Full Service

Inspect headset for wear/corrosion, adjust

Handlebar/Headset/Stem

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar for wear/damage, check torque

Inspect handlebar tape/grips for wear/damage

Inspect spoke tension and true lateral/radial as appropriate

Clean and inspect bottom bracket shell threads if appropriate

Bottom Bracket/Cranks

Inspect bottom bracket torque, ensure free rotation of bearings

Inspect chain rings/crank arms/spindle for wear/damage

Install crankset, ensure smooth running/no play

Inspect pedal body for wear/damage

Pedals

Ensure smooth rotation of pedal bearings and check for play

Inspect and regrease pedal/crankarm threads

Update electronic drivetrain firmware

Charge/replace electronic drivetrain batteries

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Saddle

Clean and insect saddle rails/clamps. Adjust position if needed

Check saddle for wear/damage

Ensure any accessories are safe/secure

Accessories

Pedal Service

pre / post mini service
ensure your bike is ready for its next ride.
looking clean and running smooth and ensure the bike is safe .


wednesday wash

Bottom Bracket Service

A mini service aimed to improve current state on a bike that doesn't need much attention / time 

Mini service /KIDS 

All of a Safety service plus; Both wheels trued and tensioned, full bike clean (including drive chain) also free fitting on any intermediate parts purchased in store.

General Service

Full inspection, full bolt check, gear index, brake adjustment, frame clean and also free fitting on any minor parts when purchased in store.

Safety Service

Premium hardtail service plus a can service and all pivot points checked for wear and greased. Includes cost of replacing bearing (bearings will be extra)

Premium Full Suspension

Full service plus lower fork service and hydraulic brake bleed.

Premium Hardtail Mtb

Bike build from box or partially build bikes. PDI

Bike build

Get your bike assessed and then receive a quote.

Service on Assessment

Here you can customise your electric bike services. Please follow the same process as above because these will be displayed separately to your standard services.

EBike Service Packages

Software Update & Diagnostic Report

A premium service is recommended every 18-24 Months.

Electric Premium Service

A standard service is recommended every 12 Month.

Electric Intermediate Service

A basic service is recommended every 6 Months.

Bosch Multi-point check

If you offer bike fittings you can customise the price and description here.

Fittings

Removal of old fork
cutting the steerer and and installing crown race.
grease headset and set up stem.
fit and adjust front brake and wheel.

Fork fitting

Bearing replacement

Help to optimize comfort, performance and efficiency.

Standard Bike Fitting

Select what extras or individual services you offer. If you don’t have a set price, you can select "Price on request"

Other Services

Seatpost Removal

Delivery/Collection

Monday night mechanic course
2 hour 
level 1 basics

mechanic course level 1

Carbon Repair

drilling out seized bolts
fitting replacement

Bolt drilling

Service Headset

Service Hub - Single

Bicycle Damage Report for Insurance Companies

Fit Handlebar Tape

Fit Tubular Tyre

Hygge Warranty Services

One of our certified mechanics will carry out a comprehensive assessment of your bike, thoroughly checking its condition. Following the assessment, they’ll provide expert recommendations on the necessary repairs or maintenance to get your bike running as smoothly as new.

Introducing Workshop

About us

Hours

Bikebook Reviews