Please edit your services to reflect what you offer and fully customise the description and prices accordingly. If you operate less than three levels of service, please look at our pre-selected items, and decide what level your services match. You can remove a level by simply unticking it.

Service Packages

Full inspection and safety check, advice on any replacement parts needed, adjustment of brakes and gears, clean braking surfaces, degrease drivetrain and reapply oil to chain. Tyre pressures checked/inflated to correct pressure, seat post cleaned and re-greased, all critical fastenings checked and torqued as required, all inner cables replaced and finished with crimped ends, valve caps replaced as required. Both wheels trued on a jig for lateral, rotational and dish alignment. Wheel hubs, headset and bottom bracket dismantled, cleaned, inspected and re-greased. Replacement bearings/parts at additional cost as required.  All over wash, rinse, dry and silicone polish to frame included as standard.

The Works Service

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

Inspect / adjust suspension linkages (if required)

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Suspension forks, clean/inspect seals and upper tubes. Check for function

Inspect headset for wear/corrosion, adjust

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar for wear/damage, check torque

Inspect handlebar tape/grips for wear/damage

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

Inspect spokes and rim for wear/damage

Inspect spoke tension and true lateral/radial as appropriate

Inspect tyres for condition and wear

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of hose/cable

Inspect condition of brake pads

Inspect caliper for correct function including clean/lube pistons

Inspect condition of hydraulic fluid if applicable

Inspect brake rotor for wear/damage/torque

Adjust brake, ensure correct function including no rub and appropriate bite-point

Clean and inspect bottom bracket shell threads if appropriate

Inspect bottom bracket torque, ensure free rotation of bearings

Inspect chain rings/crank arms/spindle for wear/damage

Install crankset, ensure smooth running/no play

Inspect pedal body for wear/damage

Ensure smooth rotation of pedal bearings and check for play

Inspect and regrease pedal/crankarm threads

Inspect cassette for wear/damage and torque

Inspect chain for wear/damage lubricate

Ensure derailleur hanger is straight and secure

Inspect rear derailleur cable/electronic wire for wear/damage

Inspect rear derailleur for wear/damage

Set rear derailleur upper/lower limits and b-tension

Adjust rear derailleur indexing

Inspect front derailleur for wear/damage

Set front derailleur position/height

Set front derailleur upper/lower limits

Adjust front derailleur indexing

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Clean and insect saddle rails/clamps. Adjust position if needed

Check saddle for wear/damage

Ensure any accessories are safe/secure

Remove bearings, clean, re-grease & reinstall (or replace, parts at additional cost)

Replace inner cables as required

Wash with bike cleaner, rinse & dry.

Apply frame polish

An Ultimate service is recommended every 12-18 Months.
Full inspection and safety check, advice on any replacement parts needed, adjustment of brakes and gears, clean braking surfaces, degrease drivetrain and reapply oil to chain. Tyre pressures checked/inflated to correct pressure, seat post cleaned and re-greased, headset checked and torqued as required. Valve dust caps, gear/brake inner cables and crimped cable ends replaced as required. Both wheels trued on a jig for lateral, rotational and dish alignment.  All over wash, rinse and dry included as standard.


Ultimate Service

Inspect tubeless system, top-up or replace consumables as appropriate

A standard service is recommended every 12 Month.
Full inspection and safety check, advice on any replacement parts needed, adjustment of brakes and gears, clean braking surfaces, degrease drivetrain and reapply oil to chain, tyres inflated to correct pressure, seat post cleaned and re-greased, headset checked and torqued as required. Valve dust caps, gear/brake inner cables* and crimped cable ends replaced as required (galvanised cables included, Shimano stainless @ additional £5 each). All over wash, rinse and dry included as standard. 

Premium Service

A basic service is recommended every 6 Months.
A standard service for 26" wheel size and above, including full inspection and safety check, advice on any replacement parts needed, tyres inflated to correct pressure, adjustment of brakes and gears, clean braking surfaces, degrease drivetrain and reapply oil to chain, seat post cleaned and re-greased, headset checked and torqued as required. Valve dust caps and crimped cable ends replaced as required.

Basic Service

Select what extras or individual services you offer. If you don’t have a set price, you can select "Price on request"

Other Services

Fit Brake Rotor

Remove & Fit New Sealed Wheel Bearings (Pair)

Service Freehub, including fitting new pawls/springs

Bike Sales

Boost E-bike conversion kit plus full installation, including custom built wheel with cassette. Wheel built to your specific rim size, 250w motor and up to 32T cassette (larger cassettes available, may be an additional charge)
6Ah 36v battery & controller, battery mount, keys and charger. Optional handlebar mount display available for an additional £50.

Boost E-bike Conversion Kit + Installation

Bottom Bracket Fit

Brakes Adjusted & Tested

Cassette Replacement & Fit

Chain Replacement & Fit

Derailleur Hanger Straightened

External Brake or Gear Cable Fit

Fit Handlebar Tape

For tubeless ready rims, including fluid


Fit Tubeless Tyre

Fit Tubular Tyre

Gears Adjusted & Tested

Headset & Crank Bottom Bracket Adjusted

To fit/replace integrated sealed bearings, without internal cabling running through

Introducing Workshop

About us

Hours

What we offer

Bikebook Reviews