Wheel Strip and Rebuild

This service is for the rebuild of a wheel when keeping the existing rim or hub. Wheel is stripped of spokes and nipples and rebuilt to spec requested or selected. *price does not include parts

Wheel Build

*Does not include cost of parts

Spoke Replacement + Wheel Truing

Rear hub service

Wheel bearing replacement

Fit wheels (including adjustments)

Front hub service

Wheel Truing (per wheel)

Complete Tubeless Setup (including tape, valves and sealant)

Tubeless setup on both wheels including tape, sealant and valves

Tubular tyres, fitting

Tyre replacement

Tube replacement

Sealant Replacement

Clean out old sealant from tyre and rim and replace with fresh sealant

Adding sealant into inner tube

Adding sealant to a pre installed inner tube.

Sealant Replacement and re taping rim

Cleaning out old sealant from tyres and rims. Replacing old or damaged rim tape

Replace Rotor

Remove and Replace Rotor. Adjust brake caliper/pads if needed

Brake System Service

Strip and clean front and back brake calipers and/or levers. Replace and worn or damaged components. Bleed the systems with new fluid. *Cost of replacement parts not included

Replace cables

Replace rim blocks

Replace disk pads

Hydraulic brake bleeding

Complete system replacement including brake bleeding

Adjustments

Replace rear derailleur + index gears

Adjustments

Rear Derailleur Service

Strip, clean and regrease derailleur. *price doesn't include cost of any replacement parts needed

Replace cables

Replace front derailleur + index gears

Chainring replacement

Chain Replacement

Cassette Replacement

Gear Indexing

Indexing the front and rear derailleur to help resolve shifting issues

Drivetrain Clean up

Chain removed and cleaned and re-lubed. Cassette and chainring cleaned.

Groupset Swap

Bottom bracket bearing service/replacement

Chain waxing

Fit new chain set

Replace press fit/campagnolo bottom bracket

Replace bottom bracket

Crank Pedal Thread Repair

Repairing damaged pedal threads in crank arm

Derailleur Hanger Straightened or Replaced

Straightening a bent hanger or replacing it with a new one. Gears checked and adjusted. *Does not include the cost of parts

Seatpost adjustment

Cold Setting Frame adjustment

Adjusting steel bike frames to fit modern wheel sizes. Frames adjusted and checked for alignment

Headset bearing replacement for Internally routed frames

Removal of brake and/or gear cable housings to allow the replacement/service of headset bearings.

Frame Wrap

* does not include the cost of the wrap kit

GTECHNIQ Ceramic Coat

Frame and components cleaned and Ceramic coat applied

Headset service/replace bearings

Replace headset

Fit front fork

MTB frame pivot bearing replacement

Cutting seized stem or seat post out of bike frame

Last resort removal of seized posts of stems is to cut them out of the frame. This can be a time consuming job. Post or stem will need to be replaced.

Full shock Service Fox CTD/ DPS/ DPX2/ Float X

Full strip and rebuild including service kit

Basic Seatpost Service

Clean and regrease internals

Rear Air Can Service (recommended every 30-50 hours riding/annually)

Removal and inspection of air can internals. O-rings and oil/grease replaced. Currently restricted to FOX, Rockshox and Marzocchi models. Please add details/Serial numbers when booking in.

Full Seat-post Service

We service most Fox and Rockshox posts. Please send serial numbers when booking in please. **We do not service the Fox Transfer SL**

Front Fork lower leg service (recommended every 30-50 riding hours/annually)

Fork lowers removed, cleaned and inspected. Wiper seals and foam rings replaced. New suspension fluid added and fork tested. Recommended every 30-50hrs riding time. Currently restricted to FOX, Rockshox and Marzocchi models. Please add details/Serial numbers when booking in.

Full Fork Service (recommended every 125-200 hours of riding time or annually)

A full fork service is recommended every 125-200 hours of riding time or annually to keep components in optimal condition. Fork lowers removed, cleaned and inspected. Wiper seals and foam rings replaced. Fork damper is removed cleaned and inspected for damage/wear as well as the air/coil spring. New fluid added and set back up to customers settings and tested. Currently restricted to FOX, Rockshox and Marzocchi models. Please add details/Serial numbers when booking in.

Cut Steerer tube to size

Steerer tube cut to the required length. (additional services and parts may be required with internally routed setups)

Replace bar tape

Fitting internal routed handle bars

Fitting internal routing bars may require new cables and/or brake bleed. Current setup measurements noted and replicated on the new bars when possible along with any other positional adjustments requested. New bar tape fitting is extra (£20)

Fit handle bars

Replace grips

Fit stem

Bike Box Packing

Bike boxed for travel. Packing material is not provided or supplied. For maximum protection for your bike, please bring extra packing material or wheel bags. While great care is taken when packing your bike, B & I Cycles is not responsible for any damage or loss that occurs during loading or transportation. By booking and paying for this service, you accept these terms and assume all risk

Bike Build From Box

Frameset Bike Build

Bike built from a bare frameset to customers specification

MAHLE e-bike diagnostic

System diagnostic and error code reports

Full Suspension MTB Gold Service

Our Gold service is recommended every 12-18 Months depending on use. This involves a full strip down and rebuild. Suspension pivot bearings inspected. No stone left un-turned. Frame polished and ceramic sprayed (suitable paintwork only) Prices start at £125. *Prices doesn't include cost of replacement parts. Replacement parts fitted at no extra charge.

Gold Service

Our Gold service is recommended every 12-18 Months depending on use. This involves a full strip down and rebuild. No stone left un-turned. Frame polished and ceramic sprayed (suitable paintwork only) Prices start at £105. *Prices doesn't include cost of replacement parts. Replacement parts fitted at no extra charge.

Silver Service

Our Silver service is recommended every 6-12 Months depending on use. *Prices doesn't include cost of replacement parts. Replacement parts fitted at no extra charge.

Bronze Service

Our Bronze Service is recommended every 6 Months depending on use. Perfect for a mid-season tune up or pre event fine tune. *Prices doesn't include cost of replacement parts. Replacement parts fitted at no extra charge.

Kid's Bike Service

Service on Assessment

Get your bike assessed and then receive a quote.

Skarper Installation

The Skarper Install service provides professional installation of the Skarper disk drive system on your bike.

Bike Check up

A comprehensive Ribble bike check-up, ensuring that all key components are inspected and adjusted for safe and smooth riding.

Basic Service

A standard Ribble service covering safety checks, tuning, and adjustments to keep the bike running reliably.

Full Service

A full Ribble service including detailed inspection, cleaning, tuning, and component checks for optimal performance.

Assessment and Repair

An assessment-led service where the Ribble technician inspects the bike and provides a repair recommendation and quote before work is carried out.

Warranty Assessment

A free warranty assessment to determine whether issues with your Ribble bike are covered under warranty and what next steps are required.