Geschlossen

Please edit your services to reflect what you offer and fully customise the description and prices accordingly. If you operate less than three levels of service, please look at our pre-selected items, and decide what level your services match. You can remove a level by simply unticking it.

Service Packages

A standard service is recommended every 12 Month.

Cargobike Inspektion (lt. Checkliste)

Clean and inspect seat post and clamp. Grease/fibre grip as appropriate

Sattel / Stütze

Clean and insect saddle rails/clamps. Adjust position if needed

Check saddle for wear/damage

Ensure any accessories are safe/secure

Gepäckträger / Schutzbleche

Inspect fork for damage/wear including dropouts, main tubes, crown, steerer tube and accessory mounting points

Rahmen / Gabel

Inspect headset for wear/corrosion, adjust

Cockpit

Inspect handlebar for wear/damage, check torque

Inspect/adjust hub bearings for wear/damage, ensure smooth movement/no play

Reifen / Laufräder

Inspect spoke tension and true lateral/radial as appropriate

Inspect condition of hose/cable

Bremsen / Beläge

Inspect brake rotor for wear/damage/torque

Inspect chain rings/crank arms/spindle for wear/damage

Kurbel / Innenlager / Pedalen

Inspect pedal body for wear/damage

Pedals

Inspect and regrease pedal/crankarm threads

Inspect chain for wear/damage lubricate

Antrieb / Schaltung

Inspect rear derailleur cable/electronic wire for wear/damage

Set rear derailleur upper/lower limits and b-tension

Inspect front derailleur for wear/damage

Set front derailleur upper/lower limits

Inspect / adjust suspension linkages (if required)

Suspension forks, clean/inspect seals and upper tubes. Check for function

Inspect stem for wear, check/adjust torque, straight

Inspect handlebar tape/grips for wear/damage

Inspect spokes and rim for wear/damage

Inspect tyres for condition and wear

Inspect condition of lever, including main body, blades and position. Adjust if required. 

Inspect condition of brake pads

Adjust brake, ensure correct function including no rub and appropriate bite-point

Inspect bottom bracket torque, ensure free rotation of bearings

Install crankset, ensure smooth running/no play

Ensure smooth rotation of pedal bearings and check for play

Inspect cassette for wear/damage and torque

Ensure derailleur hanger is straight and secure

Inspect rear derailleur for wear/damage

Adjust rear derailleur indexing

Set front derailleur position/height

Adjust front derailleur indexing

Inspect frame for damage/wear including dropouts, main tubes, seat clamp area, bottle cage and accessory mounting points

Dynamo auf Funktion prüfen

Beleuchtung

Scheinwerfer auf Funktion prüfen

Rücklicht auf Funktion prüfen

Verkabelung auf Funktion prüfen

Inspektion (lt. Checkliste)

A basic service is recommended every 6 Months.

Kleine Inspektion

Reparatur aussuchen und beauftragen

Here you can customise your electric bike services. Please follow the same process as above because these will be displayed separately to your standard services.

EBike Service Packages

A premium service is recommended every 18-24 Months.

Cargo E-Bike Inspektion (lt. Checkliste)

E-Bike Inspektion (lt. Checkliste)

Update electronic drivetrain firmware

Charge/replace electronic drivetrain batteries

Inspect tubeless system, top-up or replace consumables as appropriate

Inspect caliper for correct function including clean/lube pistons

Clean and inspect bottom bracket shell threads if appropriate

Inspect condition of hydraulic fluid if applicable

Rahmen tauschen

Umbau auf ND-Lichtanlage

Kettenschutz montieren Hollandrad (Brille unter Innenlager)

Gabel tauschen

Bremskörper tauschen (hydraulisch), inkl. einstellen + Bleeding

Bremse Komplettmontage

Vorbau wechseln, Rennlenker (inkl. Lenkerband)

Rennlenker wechseln (inkl. Lenkerband)

Schutzblech montieren HR

Schutzblech montieren VR + HR

Reifen-/Schlauchwechsel HR Holland

Reifen-/Schlauchwechsel HR Cargobike

Frontgepäckträger montieren

Scheibenbremse facen

Freilauf warten (reinigen, fetten, einstellen), exkl. Ausbau

Freilaufkörper wechseln (inkl. Radaudbau)

Industrielager wechseln, VR

HR Speiche ersetzen (bis zu 3 inkl. Zentrieren)

Rücklicht verkabeln (innenliegend)

Steuersatz wechseln

Reifen-/Schlauchwechsel HR E-Bike Nabenmotor

Laufrad de- /montieren, HR RT Holland

Einführung in Workshop

Über uns

Stunden

Was wir anbieten

Cargobike Inspektion (lt. Checkliste)

80 €

Inspektion (lt. Checkliste)

60 €

Kleine Inspektion

40 €

Reparatur aussuchen und beauftragen

FREE

Cargo E-Bike Inspektion (lt. Checkliste)

100 €

E-Bike Inspektion (lt. Checkliste)

80 €

Bikebook-Bewertungen